Ceiling Mount Wireless Motion Sensor MC003V/ CP + MW01 1200W with ISM Wave Band
Description
Are you looking for a wireless lighting control system?
Merrytek supplies you a prefect wireless control solution consisting of HF motion detector M0003V/CP and RF
wireless transceiver MW01.High reliability, easy to install and free of wire!
M0003V/CP is an active motion detector with HF system 5.8GHz. Motion can be detected through plastic, glass and thin
non metal materials.
MWO1 is an innovative and unique wireless transceiver with frequency range 433Mhz. Due to use full digital receiving &
transmitting and fixed address code for creation of groups,it has high reliability and stability.
Also, the RF module integrates advanced code check technology, significantly improved transmission reliability. Make
sure exact signal transmitting and receiving, no code missing.
In addition. Merrytek takes the lead in adopting the rotary coding switch to set up groups, very simple to achieve any-to-
any ommunication.
Feature
1. Used in wireless networking of luminaries, easy installation and free of wire.
2. With fixed code, very easy to step up any-to-any communication.
3. By digital receiving and transmitting method, high anti-interference capability and no interference to an RF sensitive device, for example, electronic keys of cars.
4. With advanced code detection technology, no code missing.
5. Merrytek takes the lead in using the rotary coding switch in RF transceiver, very easy to create groups.
6. MC003V/CP is an active motion detector with HF system 5.8GHz. Motion can be detected through plastic, glass and thin non-metal materials.
7. MW01 is an innovative and unique wireless transceiver with frequency range 433MHz. Due to use full digital receiving& transmitting and fixed address code for creation of groups, it has high reliability and stability.
8. The RF module integrates advanced code check technology, significantly improved transmission reliability. Make sure exact signal transmitting and receiving, no code missing.
9. Merrytek takes the lead in adopting the rotary coding switch to set up groups, very simple to achieve any-to-any communication.
Product Information
Function
RF Wireless Control
Motion detector MC003V/CP + RF wireless transceiver MW01 + 1-10V dimmable LED driver (Any brand)
Any-to-any communication
Once any motion is detected, the motion signal will be transmitted to other grouped sensors through RF transceiver. See example below. When the person walks to one of floors, the lamps in adjacent floors will switch on at a preset low light level synchronously.
Point-to-multipoint communication
In addition, MC003V/CP and MW01 can be used in cluster-control. See below picture, there are several exits / entrances to the corridor. Any sensor (Master) in the exits / entrances is triggered, all lamps in the corridor light up.
RF grouping (up to 16 different groups possible)
Thanks to digital communication method and fixed address code, the module has high anti-interference capability and no interference to any RF sensitive device, for example, electronic keys of cars.The RF transceiver can meet following communication modes
1/ Any-to-any communication
2/ Directional communication
3/ Broadcast communication
Each RF transceiver has 1 TXD and 2 RXD. TXD channel is used for transmitting RF signal and RXD channel is used for receiving the RF signal. Only need to set the same address code in TXD and RXD, the RF modules can automatically set up group. Address code can be easily set via rotary coding switch. See below examples.
Specifications:
MC003V/CP:
| Operating voltage | 220-240Vac, 50/60Hz |
| Rated load | 800W (inductive), 1200W(resistive) |
| HF system | 5.8GHz±75MHz, ISM wave band |
| Power consumption | ≤0.5W(standby), <1W(operation) |
| Transmitting power | <0.5mW |
| Detection zone Max.(D x H) | 16m x 10m |
| Motion detection | 0.5~3m/s |
| Detection angle | 150°(wall installation) 360°(ceiling installation) |
| IP rating | IP20 |
| Operation Temperature | -35℃~70℃ |
| Hold time | 10s/30s/90s/3min/20min/30min |
| Detection sensitivity | 10%/25%/50%/75%/100% |
| Daylight sensor | 5lux / 10lux / 30lux / 50lux / Disable |
| Stand-by dimming level | 10%/20%/30%/50% |
| Stand-by period | 5s/5min/10min/30min/1h/Disable |
| Life time | 50,000 hours |
| Guaranty | 5 years |
MW01:
| Operating voltage | 12VDC |
| Transmitting power | ≤20mW |
| Frequency range | 433MHz |
| Standby-power | <0.3W |
| Operating principle | Radio transmission |
| Transmission distance | Max:100m in the free field Max:30m inside buildings |
| Operating temperature | -20℃~70℃ |
| IP rating | IP20 |
Setting
Detection Pattern
Applications:
Stairwell, Corridor, Balcony, Pathway, Warehouse, etc
Product Tags:
|
|
Ceiling Mounted Wireless Motion Sensor MC003V/ CP + MW01 1200W with ISM Wave Band Images
|
